Towns Must Act Now to Meet Deadlines Set by EPA’s New Stormwater Permit
Big changes are ahead for Small Municipal Separate Storm Sewer System (MS4) operators in Massachusetts. EPA’s recently-released general permit goes into effect on July 1, 2017.
Under the new general permit, stormwater regulation will now require performance, not just paperwork. Municipalities should lose no time planning for the cost of the substantial measures they will need to implement in order to comply with the discharge limitations imposed in the permit. And municipalities may need to retain outside technical assistance – again, starting now.
The new permit requires municipalities to overhaul their stormwater management strategy, improve their infrastructure, and update their bylaws.
And for those MS4s that discharge to certain polluted waters – identified in the permit, they must now limit particular pollutants, including phosphorous, nitrogen, metals, and bacteria. Simply monitoring them will no longer be sufficient.
Preparing for the New General Permit
MS4 operators should begin by consulting the indispensable resources EPA has made available here.
In addition, MS4 operators have tools and programs available to them. Staffers from the Massachusetts Department of Environmental Protection (MassDEP) will travel to municipalities (upon request) to conduct trainings and information sessions. The agency will also disburse stormwater assistance grants, when available.
Moreover, regional stormwater coalitions exist to help defray some of the costs of the new permit. The Northern Middlesex Stormwater Collaborative and the Central Massachusetts Regional Stormwater Coalition are two examples.
Some Permit Milestones
The new MS4 permit becomes effective July 1, 2017. That means:
By September 29, 2017 operators must:
- revisit whether they meet the permit’s eligibility requirements.
- submit their Notice of Intent (NOI) to EPA. The NOI requires the operator to submit information on its history of compliance, water bodies and pollutants, public outreach and involvement efforts, and stormwater management program, including the “best management practices” (BMPs) it will adopt to reduce stormwater pollution.
- For the BMPs, operators should consult the Massachusetts Stormwater Handbook.
By July 1, 2018:
- develop and implement a written Stormwater Management Program (SWMP), which, over time, must include, among many other things:
- evidence that MassDEP or EPA has authorized all of the operator’s new or increased discharges,
- information on all MS4 discharges to waters subject to Total Maximum Daily Load (TMDL) requirements or to waters that are “water quality-limited waterbodies,” and
- the qualitative or quantitative goal that each BMP aims to achieve.
- implement the BMPs they outlined in their NOIs.
- identify and describe all known locations where sanitary sewer overflows have discharged to the MS4 within the previous five years.
- create an “outfall and interconnection inventory and priority ranking” to assess illicit discharge potential.
- if not already in place, implement written procedures for inspecting construction sites and enforcing runoff control measures.
- submit an Annual Report each year which evaluates the appropriateness of the MS4’s BMPs, and change those BMPs if prudent or if EPA or MassDEP so require.
By January 1, 2019:
- develop a systematic procedure to investigate each catchment in their MS4 system. Those investigations must begin by July 1, 2019, and be completed by either 2024 or 2027, depending on the type of catchment.
- begin implementing a decade-long “pollution control program” if the operator discharges to certain polluted waters outlined by the permit.
By July 1, 2019:
- establish a program detailing how the municipality expects to maintain its MS4 infrastructure in a timely manner.
- fully implement a facility-specific Stormwater Pollution Prevention Plan (SWPPP) for certain municipally-owned facilities. SWPPPs must describe the facility, identify responsible personnel, and identify stormwater controls. SWPPPs must also include provisions detailing housekeeping practices, preventative maintenance, and spill prevention and response.
- develop or modify their ordinance so that new developments meet minimum design standards in accordance with Massachusetts Stormwater Handbook Standards.
- update their stormwater management system map to include information on local infrastructure and waterbody characteristics.
By July 1, 2020:
- for new permittees, develop or modify their ordinance to investigate and prohibit illicit discharges.
By July 1, 2021:
- review existing bylaws so that the operator can consider allowing developers to install green roofs and other water retention methods.
- review its street and parking design criteria so that the operator can consider implementing low-impact design options.
Recall, this list is not exhaustive.
An Additional Wrinkle: EPA Is Changing How Operators Obtain Permits
EPA will soon promulgate regulations amending the MS4 permitting process. This is to satisfy a 2003 decision from the Ninth Circuit. The court held that EPA’s current regulations (1) do not provide for adequate notice and comment opportunities for the public, and (2) fail to ensure that the MS4 permits do, in fact, reduce pollution to the “maximum extent practicable.”
Although EPA is still considering exactly how its new permitting procedures will satisfy the court’s order, any new rule will (1) provide EPA and the public with greater involvement in determining the BMPs that operators must include in their permit applications, and (2) expressly incorporate those BMPs into the permit, to assure that MS4s reduce pollutants to the “maximum extent practicable.”
Consequently, MS4 operators seeking to be covered under the new General Permit should monitor for EPA’s final regulations concerning this permit process, coming this fall.
Image Credit: jpellgen
Posted In: Stormwater